6384 DIY Efoil Assist Kit Boost Surf Kit

Application: Foil Kayak SUP Assist, Foil Boost, Fishing Kayak, etc.

• I. RCLEAD Waterproof 6384 Motor:

KV:140
Input Voltage: 3-12S Lipo (12.6V-50.4V)
Max Torque 8.8N.M;
Shaft: No output shaft
Max. Current: 100A
Max. Output Watt: 5000W
Motor size: 62.6*84mm
Motor next weight: about 1.2kg; including wires about 1.32kg
Without Hall Sensor
Bearing: Stainless Steel Bearing
Motor phase wire length: 1m

Because seawater is corrosive, it needs to wash motor with fresh water everytime after use, and dry the motor, so to expand lifespan.

• II. RCLEAD 100A VESC6 based Controller

Current: 100A
Input Voltage: 3-12S Lipo (12.6V-50V)
Feature: VESC_TOOL Compatible
Hardware: VESC6.0
Firmware: Updatable
BEC: 5V
With Cooling fin

• III. RCLEAD 2.4GHZ Waterproof Remote with Receiver  

PCB and Screen Waterproof Rank: IP67
Input Voltage: Max 75V    
Signal for ESC: PWM (PPM) and UART-With TX and RX port to connect VESC controllers
Double Source Power Supply: Accept 5V power by ESC built in BEC or extra 5V power
Control Pump: Yes (Relay Switch) on receiver    
Control Light: Yes (Transistor Switch)
Cruise Control Funtion: With in Esurf Mode    
AccessoriesL Charging Pad, Receiver, 3pcs Dupont Cables.
Display Screen: Remote & Battery Voltage, Throttle Percentage, Signal Strength, RPM;
When work with VESC, also display Current; Temp, Volt, Speed&Distance(only for esk8 mode) or RPM (for esurf mode).

• IV. RCLEAD Folding Propeller

Material: Nylon Powder
Blade: 2 folding Blades
Color: Black
Mounting Holes: 8xM4
Size: 2.7inch from tip to installation
Max Rotation Diameter: 190mm/7.5'' (Approx.)
Height: 32mm/1.25'' (Approx.)