Application: Foil Kayak SUP Assist, Foil Boost, Fishing Kayak, etc.
I. RCLEAD Waterproof 6384 Motor:
KV:140 Input Voltage: 3-12S Lipo (12.6V-50.4V) Max Torque 8.8N.M; Shaft: No output shaft Max. Current: 100A Max. Output Watt: 5000W Motor size: 62.6*84mm Motor next weight: about 1.2kg; including wires about 1.32kg Without Hall Sensor Bearing: Stainless Steel Bearing Motor phase wire length: 1m
Because seawater is corrosive, it needs to wash motor with fresh water everytime after use, and dry the motor, so to expand lifespan.
II. RCLEAD 100A VESC6 based Controller
Current: 100A Input Voltage: 3-12S Lipo (12.6V-50V) Feature: VESC_TOOL Compatible Hardware: VESC6.0 Firmware: Updatable BEC: 5V With Cooling fin
III. RCLEAD 2.4GHZ Waterproof Remote with Receiver
PCB and Screen Waterproof Rank: IP67 Input Voltage: Max 75V Signal for ESC: PWM (PPM) and UART-With TX and RX port to connect VESC controllers Double Source Power Supply: Accept 5V power by ESC built in BEC or extra 5V power Control Pump: Yes (Relay Switch) on receiver Control Light: Yes (Transistor Switch) Cruise Control Funtion: With in Esurf Mode AccessoriesL Charging Pad, Receiver, 3pcs Dupont Cables. Display Screen: Remote & Battery Voltage, Throttle Percentage, Signal Strength, RPM; When work with VESC, also display Current; Temp, Volt, Speed&Distance(only for esk8 mode) or RPM (for esurf mode).
IV. RCLEAD Folding Propeller
Material: Nylon Powder Blade: 2 folding Blades Color: Black Mounting Holes: 8xM4 Size: 2.7inch from tip to installation Max Rotation Diameter: 190mm/7.5'' (Approx.) Height: 32mm/1.25'' (Approx.)
